$2,199.00
The Epoch Batteries 48V 125Ah Essential Series LiFePO4 Battery (Model 48125A-COMM) is a high-capacity lithium battery designed for reliable deep-cycle energy storage in off-grid solar systems, residential backup power, RVs, vans, marine house-power systems, and compatible 48V applications. With 6.4kWh of nominal energy storage, integrated battery management, Bluetooth monitoring, cold-weather self-heating, and Victron CAN-bus communications, it delivers a comprehensive energy storage solution for demanding power systems.
Built with lithium iron phosphate (LiFePO4) chemistry, this battery offers long cycle life, stable operation, and maintenance-free performance without the watering or acid servicing associated with traditional lead-acid batteries.
6.4kWh of Reliable Energy Storage
The battery features a nominal voltage of 51.2V and a capacity of 125Ah, providing 6,400Wh (6.4kWh) of nominal energy storage. It is designed for 48V-class inverters, compatible solar charge controllers, and properly configured energy storage systems.
With a maximum continuous discharge rating of 150A, the battery can supply approximately 7,680W of DC power at its nominal voltage before inverter conversion losses. It also supports peak discharge current of up to 300A for as long as 10 seconds to accommodate short startup surges from compatible inverters, motors, and compressors.
Always size the inverter, conductors, fuses, and other system components to the battery’s continuous current rating and the manufacturer’s installation requirements.
The built-in battery management system (BMS) monitors battery operation and provides protection against overcharging, over-discharging, excessive current, short circuits, and high or low temperatures. An integrated shunt provides battery state-of-charge information, helping users monitor remaining energy.
The BMS complements, but does not replace, appropriately rated external fuses, disconnects, and electrical protection equipment.
The integrated self-heating system helps enable charging in cold environments. When the cells reach 32°F (0°C), the BMS pauses charging and directs incoming charger current to the internal heating elements. Charging resumes automatically when the cells reach 41°F (5°C).
The heater requires a connected charging source supplying at least 0.5A and uses incoming charging current rather than stored battery energy. This makes the battery suitable for appropriately designed systems that must operate in cold weather, provided the installation and charging requirements are followed.
Monitor battery status using the Epoch Li-Ion mobile app for iOS and Android. Available information includes state of charge, voltage, current, temperature, and protection status.
Bluetooth connectivity makes it easier to check system performance and identify battery conditions without requiring a separate dedicated display.
The 48125A-COMM supports CAN-bus communications with compatible Victron GX devices, including Cerbo GX and Ekrano GX systems. When correctly configured, the battery can communicate charging-voltage and discharge-current limits to compatible equipment through the Victron DVCC system.
The battery includes both a battery-to-battery communication cable and a master battery-to-Victron GX CAN communication cable.
The integrated 2A active balancing system helps maintain balanced cell voltages across the battery’s 16-cell configuration. This supports consistent cell performance and battery management over its service life.
For larger energy storage requirements, up to 15 matched 48125A-COMM batteries can be connected in parallel, supporting a theoretical combined capacity of 1,875Ah and 96kWh at 51.2V.
Important: Series connection is not approved for this model. Follow the manufacturer’s requirements for battery matching, cabling, fusing, installation, and commissioning when expanding a battery bank.
The battery uses an ABS enclosure rated IP54 for dust protection and resistance to water splashes. It is intended for upright installation in a dry, protected location.
IP54 does not mean waterproof or submersible. Do not install the battery where standing water can collect, or expose it to submersion or pressure washing.
General
Electrical
Monitoring and Protection
Temperature
Physical Specifications
Warranty and Compliance
Use a charger or charging system configured for 48V LiFePO4 batteries. The manufacturer’s recommended settings are:
Never configure the charger above the manufacturer’s recommended charging-voltage range. The listed 58.0V value is the maximum charge voltage, not the recommended routine absorption setting.
This battery is designed for 48V-class LiFePO4 systems and is not a direct replacement for a 12V or 24V battery without appropriate system redesign. Confirm compatibility with your inverter, charger, solar charge controller, cabling, and protective devices before installation.
Install the battery upright in a secure, dry, protected location. Account for its 110 lb weight and allow sufficient clearance for terminals, cables, ventilation requirements, and maintenance access. Use appropriately rated DC protection and follow the manufacturer’s instructions for connections and battery-bank expansion.
Do not connect this model in series. For parallel installations, use compatible matched batteries and follow the manufacturer’s requirements for safe commissioning.
The Epoch 48V 125Ah Essential Series LiFePO4 Battery combines 6.4kWh of energy storage, high continuous output, Bluetooth monitoring, cold-weather heating, active cell balancing, and Victron CAN-bus compatibility in one integrated battery. Its long cycle-life rating and parallel expansion capability make it a versatile choice for appropriately engineered off-grid solar, backup power, RV, and other 48V energy storage applications.
| Weight | 110 lbs |
|---|---|
| Dimensions | Length: 25.2 in Width: 9.65 in Height: 8.66 in |
Only logged in customers who have purchased this product may leave a review.
Discount Applied Successfully!
Your savings have been added to the cart.
Reviews
There are no reviews yet.