Arco Zeus Omega AZ CAN Cable — M12 5P DeviceNet

Description

Zeus Omega AZ CAN Cable – M12 5P DeviceNet (WH2105)

The Zeus Omega AZ CAN Cable (WH2105) is a 5M / 16ft pre-terminated cable designed to connect the Zeus Omega Control Module to the Alternator Drive Module (ADM).

Using a standard M12 5-pin DeviceNet connector, the AZ CAN Cable provides a simple and reliable connection between Zeus Omega system modules. The cable uses an N2K-style connector standard commonly used across marine electronics and can be extended using standard NMEA 2000 cables.

Key Features

• 5M / 16ft cable length
• M12 5-Pin DeviceNet connector
• Connects the Zeus Omega Control Module to the Alternator Drive Module
• Standard N2K-style DeviceNet connection
• Compatible with standard NMEA 2000 extension cables
• Extendable in 16ft increments
• Pre-terminated at both ends
• No wire stripping, crimping, or splicing required
• Designed for Zeus Omega system installations
• Part Number: WH2105

The Connection

The AZ CAN Cable provides the primary connection between the Zeus Omega Control Module and each Alternator Drive Module.

One 5M / 16ft AZ CAN Cable is included with the complete Zeus Omega Alternator Control System. Additional WH2105 cables can be purchased separately when adding another Alternator Drive Module, replacing a damaged cable, or keeping a spare available.

Standard M12 DeviceNet Connector

The cable uses a standard N2K-style DeviceNet M12 connector rather than a proprietary ARCO connector. This makes it possible to use compatible standard NMEA 2000 cables when a longer connection is required.

Easy Extension

Need additional cable length? The AZ CAN Cable can be extended using any standard NMEA 2000 cable in 16ft increments. No proprietary ARCO extension cable is required.

Pre-Terminated for Easy Installation

The WH2105 comes fully terminated with M12 connectors on both ends. There is no need to strip wires, crimp connectors, or splice wiring during installation.

Simply connect the cable between the Zeus Omega Control Module and the Alternator Drive Module.

For Multiple Alternator Systems

Each Alternator Drive Module requires its own AZ CAN Cable connecting back to the Control Module.

The Zeus Omega Control Module supports up to 6 Alternator Drive Modules, allowing the system to expand for multiple alternator applications.

Replacement or Additional Cable

The WH2105 is available separately for:

• Adding an additional Alternator Drive Module
• Replacing a damaged cable
• Extending an existing cable run
• Keeping a spare cable on hand

Product Specifications

Product: Zeus Omega AZ CAN Cable – M12 5P DeviceNet
Part Number: WH2105
Cable Length: 5M / 16ft
Connector Type: N2K DeviceNet (M12)
Pin Configuration: 5-Pin
Extension: Standard NMEA 2000 cable
Extension Increment: 16ft
Termination: Pre-terminated at both ends
Application: Zeus Omega Control Module to Alternator Drive Module

Compatibility

The WH2105 is designed for the Zeus Omega Alternator Control System and connects the Zeus Omega Control Module (AZCM) to the Zeus Omega Alternator Drive Module (AZADM).

One cable is included with the complete Zeus Omega system. Additional cables are required when adding additional Alternator Drive Modules.

Important

The WH2105 is a 5M / 16ft cable. If additional length is required, it can be extended using a standard NMEA 2000 cable in 16ft increments.

The cable is pre-terminated, so no stripping, crimping, or splicing is required for installation.

Additional information